WOD REF-7 Engineering Grade Retro Reflective Tape, Green - 6 inch x 30 ft.

Description

Engineering Grade Retro-Reflective Tape
Product Description
WOD REF-7 Reflective Tape is 5.5 mils thick with Enclosed Lens Retroreflective Urethane Film coated with a permanent Acrylic Adhesive. Application surface should be flat (not recommended for unpainted stainless steel surface). Uniform daytime and nighttime visual appearance. Application surface should be flat (not recommended for unpainted stainless steel surface).
Product may be screen printed, guillotine cut, die-cut, or thermal kiss-cut.
Certification
Meets or exceeds requirements of Federal Specification LS-300C (Reflectivity 1, Class 1), FP-85 (Type II), and ASTM D4956-94 (Type 1).
6 Colors Available
Silver/White - Yellow - Red - Green - Orange - Blue
Rainbow Pack Carries
Silver/White - Yellow - Red - Green - Orange - Blue
Applications
Primarily designed for permanent and temporary traffic signage; also is used for safety applications and for the entertainment industry. Also used for work zone devices and non-critical signs where retroreflection is necessary.
Properties
¥ Adhesive: Acrylic
¥ Carrier/Backing: Enclosed lens retroreflective urethane film
¥ Thickness: 5.5 mils
¥ Adhesion: 50 oz/in (to stainless steel test panel)
¥ Application Temperature: +40 F
¥ Service Temperature Range: -40 F to +180 F
¥ Application temperature range: 32 F to 140 F
¥ Certifications: LS-300C (Reflectivty 1 Class 1), FP-85 (Type II), ASTM D4956-94 (Type 1)
¥ 3" neutral core/carton
Alternative to
Avery T-1500 Series, Nippon/Carbide 8100 Series, 3M 3200 Series.
Note: Sizes will be the tape industry standard metric sizes, ex. 12mm for every 1/2 inch of nominal value tape width (Rolls are give or take 5% wider or narrower than the nominal size).
•ENGINEERING GRADE REFLECTIVE TAPE - WOD Reflective Tape is constructed with enclosed lens retroreflective urethane film coated with a permanent acrylic adhesive. It is 6-mil thick and 30 feet long perfect length for one time projects to increase visibility and safety in areas where is needed. The adhesive has a dwell time of 24 hours, but reaches 75% of its adhesiveness after 15 minutes.
•CERTIFICATIONS AND USES - It is designed to sustain 7-years of durability, exceeding the requirements of ASTM D4956 (Type 1) and EN-12899 RA1, and meeting the requirements of LS-300C (Reflectivity 1 Class 1) and FP-85 (Type II). Used for work zone devices and non-critical signs where retroreflection is necessary; caution tape, dot tape, on motorcycles, on trailers, on clothing, on vehicles, for construction, marking, safety signs, lettering, and graphics.
•ENHANCE SAFETY - WOD REF-7 is designed primarily for permanent and temporary traffic signage for high visibility to keep you safe. It is easy to apply (applications surface should be flat and free of any debris) to trucks, trailers, vehicles, and anywhere you need to increase detection distance.
•COLORS FOR SAFETY - Available in 6 different solid colors: Blue, Green Orange, Red, Yellow, and Silver/White. Our tape is commonly used to embellish traffic signage or alert pedestrians to hazardous obstacles. Choose the color that meets your need.
•PEACE OF MIND SHOPPING 100% MONEY BACK GUARANTEE! - We sell ENGINEERING GRADE REFLECTIVE TAPE in 6 solid colors if you are not satisfied, we will do our due diligence to make sure you are completely satisfied with the product and service. Just send us an email, and we promise to make it right!