Hot USPS 5 Gallon Stainless Steel Vacuum Degassing Chamber Silicone Kit w/3 CFM

Description

SKU:  7660415
Description:
Heavy duty vacuum chamber is perfect for removing gases from compounds which have become entrapped in the mixture when mixing components. Vacuum chambers are required to assure a bubble-free mold when mixing resin and silicone rubbers and slower setting resins. Our vacuum chamber greatly reduces gas bubbles and pockets that would weaken the epoxy or silicone. Clear lid allows for you to see air being vacuumed out of your resin mix. Built-in valve and gauge provides ease of use and convenience. Glycerin filled industrial gauge resists vibrations and keeps the gauge accurate to within 0.5inHg. This vacuum chamber is perfect for degassing silicone, epoxy resin, solvents and more!
Features:
1/4HP 3CFM Single Stage Vacuum
：
1.High Efficiency & Low Noise
2.Heavy-duty Aluminum Alloy Casing
3.Direct Drive Motor Allowing Easy Starting and is Maintenance Free
4.Oil Sight Glass for Monitoring Oil Levels
5.With Oil Drain Plug Positioned at Bottom of Oil Reservoir
6.Internal High Volume Cooling Fan for Extended Use
7.Exhaust Port with Exhaust Cap
8.ON/OFF Switch
9.Non Slip Cushion Handle
10.Includes a Bottle of Vacuum Oil
“
FREE
”
5 Gallons (21 Liter) Chamber
：
1.Heat cured silicone gasket is chemically resistant to solvents like butane and does not loose vacuum over time
2.Heavy duty 3/4" shatter resistant acrylic crystal lid allows you to see inside and bulletproof
3.Hydro-tested stainless steel container is high strength, very durable and withstands up to 160
º
F
4.Glycerin filled industrial gauge resists vibrations and keeps the gauge accurate to within 0.5inHg.
5.5 foot collapse-proof steel wire reinforced hose easily withstands any vacuum pressure you throw at it and features
6.Both the release valve and ball valve are built into a single unit for ease of use
7.Durable brass fittings fit all vacuum pump ports
8.50 micron air filter reduces air flow back into the chamber for purging and prevents dust and debris from entering the chamber
9.4.75" x 4.75" non stick silicone pad allows you to easily remove resin mixes
10.Max vacuum rated to 29.9inHg at sea level
11.Our vaccum chamber pairs perfectly with single or dual stage 3 to 9 CFM pumps
12.Perfect for applications like degassing urethane, silicones, epoxies, stabilize wood, extracting essential oils from organic materials, etc.
Specifications:
1/4HP 3CFM Single Stage Vacuum
：
Power Voltage
110V, 60Hz
Motor Power
1/4HP, 3 CFM
Pump Speed
1720 RPM
Oil Capacity
250ml
Micro Rating
75 Microns (10pa)
Specifications:
5 Gallons (21 Liter) Chamber
：
Maximum Rated Vacuum
：
29.9inHg @ sea level / 24.82 @ 5000ft
Hose Connector
：
1/4" SAE w/ 45
º
Seat
Chamber Max Temp
：
160
º
F
Gauge Style
：
Gylcerin Filled
Chamber Dimension
：
10-7/8" x 11-7/8" (Without Lid)
Overall Dimension
：
11-5/8" x 12-5/8"
Package including:
1 *5 Gallon Vacuum Chamber
1*3/4" Acrylic Lid
1*Heat Treated Silicone Lid Gasket
1*Glycerin Filled Gauge with Brass Fittings
1*50 Micron Air Filter
1*Non-Stick Silicone Pad
1*5 Foot Steel Wire Collapse-Proof Hose
1*Instruction Manual
1*1/4HP 3CFM Single Stage Vacuum Pump
1*Bonus Vacuum Oil
FDA Disclaimer
The following FDA Disclaimer is required for all eBay listing in Healthcare category and is included for REFERENCE:The saleof this item may be subject to regulation by the U.S. Food andDrug Administration and state and local regulatory agencies.Ifso, do not bid on this item unless you are an authorized purchaser. If the item is subject to FDA regulation, We will verify your status as an authorized purchaser of this item before shipping of the item.(The seller’s name: Jenny Liu City: Beijing State: Beijing Country: China Telephone number: 86-18789632541)
This item has been cleaned and treated according to the manufacturer's instructions.
Payment
We accept payment by PayPal. PayPal enables you to make payment quickly and securely online.
1: We only accept payment via PayPal.
2: Please pay the money within 5 days after the auction ended.
3: Please offer home or mobile phone when the item's Value exceeds 100 (USD, EUR, AUD, GBP) so that we can make sure you get the item safely.
Shipping
All items will be shipped by e packet or Airmail post within 1 business days.
The trade is cross-border and Airmail is the cheapest post way, so it take a long time for delivery. If you don't want to wait so long time, please kindly contact us for other shipping method. Meanwhile, we offer other choices in the shipping method which you can choose yourself.
We are not Responsible for your Customs duty.
We don't add taxes, VAT or other hidden charges. You pay us what you see on the invoice, i.e. goods subtotal + shipping cost (not include duties). Please find out as much as you can about your import taxes in your own country before bidding the item. You need to pay for the import duties in case that occurred for certain goods.
Terms of sale
l About Warranty:
We guarantees new equipment other than accessories to be free from defects in workmanship and materials for a period of twelve months (six months for spare parts) from the date of shipment under normal use and service. Our company's obligation under this warranty is limited to repairing, at our company's option, any part which upon our company's examination proves defective.
Return Policy
If you receive a defective item which you want to return, please contact us within 2 days from the day you receive the item. All return items must be returned with its original packaging and accessories. If we confirm the damage happened during the shipment, we will bear the shipping cost for return.
We will refund the money to you when we get the return items. Or replace item for you free of charge.
About us
We are the manufacturer and distributor of medical equipments for more than 10 years.
If you are interested in the distribution work, please feel free to contact us.
We will reply to you within 48 hours.
Please kindly wait for us.