AutoStop Electric Air Pump High Pressure Air Compressor 220V Rifle PCP Diving

Description

Store Home
New Arrivals
On Sale
Shipping
Payment
Feedback
Contact
Store Categories
Jewelry Design & Repair
Digital Readout& Linear Scale
Air Compressor
Welding & Soldering Tools
Handheld Inkjet Printer
Leather Tools
Rosin Heat Press Machine
Industrial Remote Control
Sliding Table
Stepper Motor
Vibration Motor
CNC
3D Printer
Other
Store Newsletter
Why Buy From us
AutoStop Electric Air Pump High Pressure Air Compressor 220V Rifle PCP Diving
Items Description
AutoStop Electric Air Pump High Pressure Air Compressor 220V Rifle PCP Diving
1. Shipping list
1PCS
Air Pump
1PCS
Water Pump
2PCS
Water Pipe
1PCS
Filter
5PCS
Filter Element
1PCS
Female End for Hose
2PCS
Pressure Release (Relief) Screw
1PCS
Anti-Vibration Pad
1SET
O-Ring
4PCS
Explosion-Proof Disc
1PCS
Breath Nozzle
2. Parameters
Model
YongHeng 30MPA(BASIC)
YongHeng 30MPA(PLUS)
YongHeng 30MPA(AUTOSTOP)
YongHeng 30MPA(PRESET)
Function
Basic high pressure air pump function.
1. Basic high pressure air pump function.
2.Adds a Cyclone Oil-Water Separator.
3. Add a Safety Valve which helps to protect the compressor .
1. With the function of PLUS Model.
2.The machine will auto stop and alarm when reach 30MPA
1. With the function of PLUS Model.
2. It can set the pressure freely.
3. the machine will auto stop and alarm, when reach the pressure you set.
Voltage
220V 50HZ
Power Rating
1.8KW
Inflating Speed
2800R/Min
Noise
MAX 78DB
Air Flow Rate
4
0L/Min
50L/Min
Working Pressure
0-300BAR 0-30MPA 0-4500PSI
Cooling System
Water Cooling
Compression Stage
Two Stage
Lubrication Mode
Splash Type
Material of Cover
Cast Aluminum
Material of Motor
100% Pure Copper
Volume
L36CM* W18CM *H37CM
Net Weight
21KG
21KG
21KG
21KG
Oil:
L-MH 46 Anti-Wear Hydraulic Oil (High Pressure) GB 11118.1
or 5W-40 Oil (the machine is without of oil because the oil is not allowed on the plane)
Test Inflating Result
It takes 3 mins 50 seconds to fill full 0.45L tank to 30MPA.
It takes 8 mins to fill full 1L tank to 300BAR
Service
1.One year warrtary.
2. Please let me know your email when order if you want the english instruction and the video for installing and maintenance
TIPS:
1. Please and add lube oil and install breath nozzle before you start using the machine.
No.46 wear resistant hydraulic oil. Don’t forget to put the lube oil into the compressor before running.
3. If the machine vibrates violently, please add pad or towel  under the compressor
4. When the compressor working, the cooling system must be working at the same  time.
5. Please pay attention to the level of oil.
3. Advantage
Products using high-quality components to ensure quality.
All the product will be double test before shipping.
CE Marked.
We provide after-sales service.
Please let us know your email if you want the English instruction or the video of installation.
Please leave a message of the Voltage and the Plug, the GB,EU,US,BS,SOUTH AFRICA,ITALY PLUG IS FREE,
the others plz contact us and will need more .
NOTICE:
1. Machine downtime: because of work overheating, we recommend that put the machine  in a cool and smooth place, and put the pump in a vat cold water for prevent the machine to overheat. As long as the machine operating temperature does not exceed 65 degrees, it can work continuously for a long time.
2. A single working time can not exceed 30 minutes, the machine temperature can not exceed 80 degrees Celsius. If the working time is too long or the temperature is too high, the device will enter the over-temperature protection state, automatic shutdown. If the machine is too hot automatic shutdown is a normal phenomenon, reset after a few minutes when the temperature can return to normal start again.
3. Please prepare enough cooling water, it is recommended to use 16 liters of bucket filled with two cold water, when the machine temperature exceeds 60 after the pump directly to another bucket, in order to achieve better cooling cooling effect
Feedback
Payment
Return Policy
About us
Contact us
We maintain high standards of excellence and strive for hundred percent customer satisfaction. Feedback is very important to us. We hope that you contact us immediately before you give neutral or negative feedback, so that we can address your concerns. It is impossible to address issues if we do not know about them!
We accept PayPal payment only
Payment must be received within 7 days after order is made.
Fees such as import duties, taxes are not included in the item price or shipping costs. These charges are the buyer's responsibility.
Your satis
faction is our ultimate goal. We work hard to earn your trust and future business. Our certified technicians have tested each item before shipping. The unit comes with 1 year limited warranty on all manufacturing defects.
a) If you receive a defective item, you may return it or ask for a discount. Please contact us within 14 days after you receive the package.
b) What you returned must be intact and in its original packaging.
Fast to Buy Limited is specialized in industrial automation field repairs. Like LCD screen, industrial burner accessories, printer accessories, instrument accessories, and other fields solutions, we supply Sumsung, LG, AUO, Xinje, Riello, Honeywell, Dungs, Mitsubishi, Siemens, Heidelberg machine parts and The international famous brand accessories etc.
If you need any industrial automation field repairs, welcome to contact us, we will try our best to help you .
Business Hour: Monday To Friday: 8:30 AM to 5:00 PM (Beijing China time)
Due to time zones, our reply to your questions may not be immediately. But within above working time, we w
ill reply your email within 24 hours. If it's non-workdays, please kindly be patient and wait till Monday.
Please contact us with ebay message.
Please feel free to contact us if you have any questions.
Copyright fasttobuy 2017 rights reserved.
On Jul-15-21 at 20:21:20 PDT, seller added the following information: