5 Gallon Stainless Steel Vacuum Degassing Chamber Silicone Kit w/5 CFM Pump USA

Description

Heavy duty vacuum chamber is perfect for removing gases from
compounds which have become entrapped in the mixture when mixing
components. Vacuum chambers are required to assure a bubble-free
mold when mixing resin and silicone rubbers and slower setting
resins. Our vacuum chamber greatly reduces gas bubbles and
pockets that would weaken the epoxy or silicone. Clear lid
allows for you to see air being vacuumed out of your resin mix.
Built-in valve and gauge provides ease of use and convenience.
Glycerin filled industrial gauge resists vibrations and keeps
the gauge accurate to within 0.5inHg. This vacuum chamber is
perfect for degassing silicone, epoxy resin, solvents and more!
Features:
1/4HP 3CFM Single Stage Vacuum
：
1.High Efficiency & Low Noise
2.Heavy-duty Aluminum Alloy Casing
3.Direct Drive Motor Allowing Easy Starting and is Maintenance Free
4.Oil Sight Glass for Monitoring Oil Levels
5.With Oil Drain Plug Positioned at Bottom of Oil Reservoir
6.Internal High Volume Cooling Fan for Extended Use
7.Exhaust Port with Exhaust Cap
8.ON/OFF Switch
9.Non Slip Cushion Handle
5 Gallons (21 Liter) Chamber
：
1.Heat cured silicone gasket is chemically resistant to solvents
like butane and does not loose vacuum over time
2.Heavy duty 3/4" shatter resistant acrylic crystal lid allows
you to see inside and bulletproof
3.Hydro-tested stainless steel container is high strength, very
durable and withstands up to 160
º
F
4.Glycerin filled industrial gauge resists vibrations and keeps
the gauge accurate to within 0.5inHg.
5.5 foot collapse-proof steel wire reinforced hose easily
withstands any vacuum pressure you throw at it and features
6.Both the release valve and ball valve are built into a single
unit for ease of use
7.Durable brass fittings fit all vacuum pump ports
8.50 micron air filter reduces air flow back into the chamber
for purging and prevents dust and debris from entering the
chamber.
9.4.75" x 4.75" non stick silicone pad allows you to easily
remove resin mixes
10.Max vacuum rated to 29.9inHg at sea level
11.Our vaccum chamber pairs perfectly with single or dual stage
3 to 9 CFM pumps
12.Perfect for applications like degassing urethane, silicones,
epoxies, stabilize wood, extracting essential oils from organic
materials, etc.
Specifications:
1/4HP 3CFM Single Stage Vacuum
：
Power Voltage 110V, 60Hz
Motor Power：110V 1/4HP, 3CFM , 220V 1/4HP, 2.5CFM
Pump Speed 1720 RPM
Oil Capacity 220ml
5 Gallons (21 Liter) Chamber
：
Maximum Rated Vacuum
：
29.9inHg @ sea level / 24.82 @ 5000ft
Hose Connector
：
1/4" SAE w/ 45
º
Seat
Chamber Max Temp
：
160
º
F
Gauge Style
：
Gylcerin Filled
Chamber Dimension
：
11.2"*11.2"/28cm*28cm (Without Lid)
Package including:
1*5 Gallon Vacuum Chamber
1*3/4" Acrylic Lid
1*Heat Treated Silicone Lid Gasket
1*Glycerin Filled Gauge with Brass Fittings
1*50 Micron Air Filter
1*Non-Stick Silicone Pad
1*5 Foot Steel Wire Collapse-Proof Hose
1*Instruction Manual
1*1/4HP 3CFM Single Stage Vacuum Pump
Payment
We accept PayPal only. We will ship out the item after receiving cleared payment.
Shipping
A complete and correct shipping address is essential.
Customers with shipping addresses outside of the U.S. are responsible for all duties and import taxes. Please contact your customs for information
Return Policy
All items are in brand new condition unless specified.
FDA declaration:
The sale of this item may be subject to regulation by the U.S. Food and Drug Administration and state and local regulatory agencies. If so, do not bid on this item unless you are an authorized purchaser.If the item is subject to FDA regulation, we will verify your status as an authorized purchaser of this item before shipping of the item.All of our products are CE approved. Please kindly check the copy of the certificate in the listing below.(Amy-China-Beijing-86-13578947868)
This item has been cleaned and treated according to the manufacturer's instructions.
Contact Us
Any questions, please contact us through eBay message or e-mail, We will reply within 1-2 business days (public holidays not included).
working time: Monday - Friday   9:00 AM - 5:30PM (Beijing)